Summary

This document addresses work instructions for how to transfer workgroups on the IT3200 with Finger Read.

To Transfer

Please note that these instructions may vary depending on the clock setup; workgroup levels may vary.

Employees must be punched in prior to any workgroup transfer.

At the clock:

  1. Push the F1 button (Figure 1)

  2. The Display Area (Figure 2) will prompt the employee for their badge number.

  3. The Display Area will prompt for the next steps.

  4. Enter the badge number and press the check mark.

  5. Place finger on the Finger Reader (Figure 3)

  6. Enter the Location code on the keypad and press enter.

  7. Enter the Department code on the keypad and press enter.

  8. The Display Area will show employees name and Transaction Accepted.